Sailing with Lin & Larry Pardey

On long term loan to Arques School of Boatbuilding and Spaulding Wooden boat Center Sausalito, California For information or to arrange to use these patterns, please contact Bob Darr or Mark Welther at the Spaulding Wooden Boat Center ph. (415) 332-3179 website - www.spauldingcenter.org. There will be a deposit required for the off-site use of these patterns and a handling charge to cover the expenses incurred by the center, will be deducted from the deposit upon the return of each pattern.

Patterns numbered as follows:

1.	Bobstay fitting
2a.	Boomkin fitting incorporating Backstay tang and anchor roller
2b.	Tang for boomkin fitting
3.	Cranse iron and core box (bowsprit end fitting)
4.	Whisker stay tang, starbd.
4a.	Whisker stay tang, port
5.	Boomkin stay tang (interchangeable.)
6.	Chainplate
7.	Gammon Iron (stemhead fitting)
9.	Upper gudgeon (fits flush on the transom) See Details Classic Yacht Construction for fitting details of gudgeons and pintles.
9a.	Lower gudgeon
9b	Rudder pintle and pin
9c.	Middle gudgeon
12.	Jiffy reefing pennant fitting
13,	Boom bail
14.	Eye nut
15.	Spinnaker pole gooseneck
15a	Spinnaker pole fitting
16.	Mast boot band
17.	Sheet winch mount
18.	Lifeline stanchion base and corebox
19.	Hawse hole
20a.	Boom gallows top and core box
20b.	Boom gallows base and core box
23.	Dinghy chock base
24.	Sculling oar lock
25a.	Cockpit Hatch hinge, pin fitting
25b.	Cockpit Hatch hinge, gudgeon fitting
26.	Prism light frame – Simpson Lawerence standard prism glass
29.	Oil lamp bracket for use on standard 1-1/2” diameter I.D brass waterpipe for table stanchions
30.	Portlights, four pieces – Outer flange, inner flange, spigot, opening port
31.	Windvane gudgeons, bottom, middle, top
32.	Windvane tiller arm